Installing The Battery Pack - Toshiba Satellite P10 series User Manual

Hide thumbs Also See for Satellite P10 series:
Table of Contents

Advertisement

5. Slide the battery latch to the right, then pull the battery out of the battery bay.
CAUTION: For environmental reasons, do not throw away a spent battery
pack. Please return spent battery packs to your TOSHIBA dealer.

Installing the battery pack

To install a battery pack, follow the steps below.
CAUTION: The battery pack is a lithium ion battery, which can explode if
not properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the connectors on the
battery face the connectors on the computer.
Battery
Figure 6-1 Removing the battery pack
Replacing the battery pack
6-13

Advertisement

Table of Contents
loading

Table of Contents