Automatic Hibernation; Standby Mode - Toshiba Satellite P10 series User Manual

Hide thumbs Also See for Satellite P10 series:
Table of Contents

Advertisement

Automatic Hibernation

The computer will enter Hibernate mode automatically when you press the power
button or close the lid. First, however, make the appropriate settings according to
the steps below.
1. Open the Control Panel.
2. Open Performance and Maintenance and open TOSHIBA Power
Management.
3. Select the Advanced tab.
4. Select Enable hibernate support.
5. Enable the desired Hibernation settings for When I press the power button
and When I close the lid of my portable computer.
6. Click the OK button.
Data save in hibernation mode
When you turn off the power in hibernation mode, the computer takes a moment
to save current memory data to the hard disk. During this time, the Built-in HDD
indicator will light.
After you turn off the computer and memory is saved to the hard disk, turn off the
power to any peripheral devices.
CAUTION: Do not turn the computer or devices back on immediately.
Wait a moment to let all capacitors fully discharge.

Standby mode

In standby mode the power remains on, but the CPU and all other devices are in
sleep mode.
NOTE: If the computer is not used or accessed in any way, including
receipt of e-mail, for 15 minutes when the AC adaptor is connected, the
computer will automatically enter Standby mode (TOSHIBA Power
Management Utility default).
To restore operation, press the power button.
If a network application is active when the computer automatically enters
Standby, it might not be restored when the computer wakes up from
standby. To prevent the computer from automatically entering standby
mode, disable Standby in the TOSHIBA Power Management Utility. Open
the TOSHIBA Power Management Utility and click the Power Save Modes
tab. Next select either an AC Power or Battery Power option and then
click details. When the details page comes up, you can disable the Standy
setting be moving the slider to Never. That action, however, will nullify the
computer's Energy Star compliance.
Starting up for the first time
3-10

Advertisement

Table of Contents
loading

Table of Contents