Lcd Panel - Toshiba Satellite P10 series User Manual

Keyboard
Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 5, The Keyboard.
Problem
Some letter keys
produce numbers
Output to screen is
garbled

LCD panel

Problem
Lines appear broken
No display
Problems above
remain unresolved or
other problems occur
Hardware and system checklist
Procedure
Check that the numeric keypad overlay is not
selected. Press Fn + F10 and try typing again.
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software's documentation.
If you are still unable to use the keyboard, consult
your dealer.
Procedure
Check if you are in DOS mode. In DOS, lines may
appear broken, because of the LCD screen's higher
resolution. The Windows display should appear
normal.
Press hotkeys Fn + F5 to change the display priority,
to make sure it is not set for an external monitor.
Make sure instant security was not activated. Try
entering your password, if you have one registered.
Or, turn the power off and back on to clear instant
security.
Refer to your software's documentation to determine
if the software is causing the difficulty.
Contact your dealer if the problems continue.
8-7