Lan; Installing The Battery Pack - Toshiba Satellite Pro R50-B series User Manual

2.
3.
4.
5.
6.
1. Battery lock
2. Battery release latch

Installing the battery pack

To install a battery pack, do the following:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1.
2.
3.

LAN

The computer might have built-in support for Ethernet LAN (10 megabits
per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second,
100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second,
1000BASE-T).
This section describes how to connect/disconnect to a LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
User's Manual
Click the power icon (
down while holding down the SHIFT key. Ensure that the Power
indicator is off.
Remove all cables and peripherals that are connected to the
computer.
Close the display panel and turn the computer upside down.
Slide the battery lock into its unlocked ( ) position.
Slide and hold the battery release latch to disengage the battery pack
and then lift it up to remove it from the computer.
Figure 4-6 Releasing the battery pack
2
Insert the battery pack as far as it will go into the computer.
Ensure that the battery pack is securely in place and the battery lock is
in its locked ( ) position.
Turn your computer over.
) on the Start screen and then click Shut
1
3
3. Battery pack
4-19