Working Environment - Toshiba Satellite P10 series User Manual

For optimum performance, use your computer product only under recommended
conditions. Read additional restrictions in bundled documents. Contact
TOSHIBA Service and Support for more information.
CE compliance
This product and the original options are designed to observe the related EMC
(Electromagnetic compatibility) and safety standards. However, TOSHIBA
should not guarantee that this product still observes these EMC standards if
options or cables not produced by TOSHIBA are connected or implemented. In
this case the persons who have connected /implemented those options / cables
have to assure that the system (PC plus options / cables) still fulfils the required
standards. To avoid in general EMC problems following advice should be
observed:
• Only CE marked options should be connected / implemented
• Only best shielded cables should be connected

Working environment

This product was designed to fulfil the EMC (electromagnetic compatibility)
requirements to be observed for so-called "Residential, commercial and light
industry environments". TOSHIBA do not approve the use of this product in
working environments other than the above mentioned "Residential, commercial
and light industry environments".
For example, the following environments are not approved:
• Industrial Environments (environments with a mains voltage >230V~)
• Medical Environments
• Automotive Environments
• Aircraft Environments
NOTE: If this product is supplied with a network port, please refer to the
paragraph "Network connection".
Any consequences resulting from the use of this product in working environments
that are not approved are not the responsibility of TOSHIBA Europe GmbH.
The consequences of the use of this product in non-approved working
environments may be:
• Interference with other devices or machines in the near surrounding
• Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the near surrounding area
Therefore TOSHIBA strongly recommend that the electromagnetic compatibility
of this product should be suitably tested in all non-approved working
environments before use. In the case of automobiles or aircraft, the manufacturer
or airline respectively should be asked for permission before use of this product.
area
XIX