2. Lift the panel up and adjust it to the best viewing angle for you.
CAUTION: Use reasonable care when opening and closing the display
panel. Opening it vigorously or slamming it shut could damage the
computer.
Turning on the power
This section describes how to turn on the power.
NOTE: After you turn on the power for the first time, do not turn it off
until you have set up the operating system. Refer to the section Starting up
for the first time in this chapter.
1. If one is connected, make sure the diskette drive is empty. If a diskette is in the
drive, press the eject button and remove the diskette.
2. Open the display panel.
3. Press the computer's power button and release.
Figure 3-5 Turning on the power
Turning on the power
3-7