Region Selection - Toshiba Satellite P10 series User Manual

Region selection

Telecommunication regulations vary from one country/region to another, so you
will need to make sure the internal modem's settings are correct for the country/
region in which it will be used.
1. Point to "All Programs", point to "TOSHIBA", point to "Networking" and
click "Modem Region Select".
NOTE: Do not use the Country/Region Select function in the Modem setup
utility in the Control Panel if the function is available. If you change the
Country/Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
3. Click the icon with the primary mouse button to display a list of regions that
the modem supports. A sub menu for telephony location information will also
be displayed. A check will appear next to the currently selected region and
telephony location.
4. Select a region from the region menu or a telephony location from the
submenu.
• When you click a region it becomes the modem's region selection, and the
New Location for telephony will be set automatically.
• When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem's current region setting.
Figure 4-8 The Region Selection icon
Using the internal modem
4-19