Panasonic LightPix AE20 User Manual page 45

Operation in TEACHING mode
The number in < > in the table below represents the button number of the o
unit (see the figure on the right).
TEACH: OK (teaching for OK product only) TEACH: OK (teaching for OK product only)
In INSPECTION (or RUN)
mode
38
In TEACHING mode ("TEACH" is displayed)
Exposure time: 0.03 to 50.00 ms
(default: 3.05)
<7>: Decrease exposure time up to
0.03 ms
<8>: Increase exposure time up to
50.00 ms
SIZE: Resizes the inspection area
If you want to perform a teaching at
this point, press <6> and then <1>.
MOVE: Moves the inspection area
If you want to execute teaching, press
<6> and then <1>.
T.SIZE: Resizes the Color
Extraction area
If you want to execute a teaching at
this point, press <6> first and then <1>
after resizing.
T.MOVE: Moves the Color
Extraction area
<6>: Executes a teaching
Teaching is performed for the current
product type.
DONE: Indicates successful
completion of teaching
FAIL: Indicates unsuccessful
completion of teaching
(the ALARM signal is output).
<5> : Returns to the top.
peration
You can always
change the
product types by
pressing <2> and
<5> at the same
time.
Example: