3.4.5 Grounding the Main Unit
Observe the followings to connect the grounding cable.
•
Do not commonly use the ground with other devices.
•
Grounding should be as close as the main unit as possible, and keep the distance short.
•
Use a grounding cable of 0.5 to 1.25mm2 diameter.
3.4.6 Comformity to the EMC standard
The LightPixAE20 will comply with the EMC standards (EN61000-6-4, EN61000-6-2) in EMC Directive (EMC
Directive 89/336/EEC). The product must fulfill the following conditions:
1. No USB communication
2. Ferrite core must be used for the wirings as the figures shown below.
3. Mounting plate ANE8870 (separately sold) must be used for grounding.
Mount Plate - Product No. ANE8870
Manufacturer
Ferrite Core
TDK CO., LTD.
Product No.
ZCAT1730-0730A
25