Permissions Tab (Administrators Only) - HP StoreOnce User Manual

Table 23 Store details (continued)
Secondary transfer
policy
To create a new store (administrators only)
1. Click the Create button at the top of the StoreOnce Catalyst page.
2. Provide the store details as described in the table above and click Create.
3. The store is created and displayed in the Stores list where its status changes from Creating to
Online.
To edit store details (administrators only)
Procedure 3
1. Select the store in the list to display its details and then click on Edit.
2. Amend details as appropriate and click Update to apply them.
To delete a store (administrators only)
Select the required store and then click on Delete in the Details section to delete it. You will be
prompted to confirm that this is what you wish to do.

Permissions tab (administrators only)

This tab is only active if the Client Access Permission Checking box has been enabled on the Settings
tab.
The Client list is only populated with individual clients or client groupings if you have set up clients
on the Clients tab.
90 HP StoreOnce Catalyst functions
policies have different values, the media server will determine which is the most bandwidth
efficient transfer policy to use.
This may be High or Low (see definitions in row above) and is normally the opposite to the
Primary transfer policy so that the media server can choose to use which is most appropriate.
However, if you wish to enforce the transfer policy that the media server uses, set both Primary
and Secondary transfer policies to the same value.