HP StoreOnce User Manual page 13

Table 1 System information parameters (continued)
Parameter
IP Address
Software revision
Status
This section provides details about the rolled-up system status of the system and the status of the
services running.
Table 2 Status parameters
Parameter
Overall Status
StoreOnce Subsystem
Virtual Tape
NAS
StoreOnce Catalyst
Replication
Housekeeping
Description
The IP address for the StoreOnce Backup system. This is the IP address that you should
use when targeting backups and setting up replication mappings and Catalyst jobs.
HP StoreOnce VSA Backup systems may have up to two IP addresses depending on how
the network is configured. See the HP StoreOnce VSA Deployment and Configuration
guide for more information.
The software revision running on the StoreOnce Backup system.
Description
This is the overall system state.
This is the status of the background support processes with which the customer does not
directly interact, such as EventManager and ResourceManager.
This is the status of the VTL service.
This is the status of the NAS service.
This is the status of the StoreOnce Catalyst service.
This is the status of the Replication service.
This is the status of the Housekeeping service.
System information and status 13