HP StoreOnce User Manual page 85

To add a client (administrators only)
Procedure 2
1. Click Add.
2. Enter the name of the client and a description. If required (and this feature is supported by
your client application), enable the Allow Store Creation checkbox.
NOTE: The client application must be configured with a client identifier, such as
MediaServer1. This identifier is what you should enter in the Name field. Note that no spaces
are allowed in the Name field.
3. Click Update.
Table 21 StoreOnce Catalyst Clients fields
Field
Client
Description
Allow Store Creation
Description
The client identifier is a user-defined string that is set through the backup
application software and which can then be used on the HP StoreOnce Backup
system to identify a client. For example, there may be multiple media servers
sharing the same ID; so, the identifier is not a client machine name or a name
generated by the software. Best practice is to ensure that the name created on
the backup application is meaningful for use in searches on the StoreOnce
Backup system.
This is a description that can be included on the StoreOnce Backup system
when the administrator adds a client.
If the client application supports it, you may also enable clients to create stores
remotely from this tab. Refer to your client application's documentation for
further details.
StoreOnce Catalyst page 85