Installing The 1-Inch Forward Rear Wheel Positioner - Invacare 9000 Standard Weight User Manual

12.3 Installing the 1-inch Forward Rear Wheel Positioner

WARNING
DO NOT use the 1-inch forward bracket on recliner wheelchairs OR adjustable angle back wheelchair. Otherwise injury or damage may
occur.
Recliners and Wheelchairs with 1-Inch Forward Rear Wheel Positioner Only: Anti-tippers MUST BE attached at all times.
1. Remove both rear wheels from the wheelchair. Refer to
Removing/Installing Rear Wheels on page 48.
2. Position the right hand 1-inch forward rear wheel positioner onto the
right hand side of the wheelchair frame (FIGURE 2).
 Right and left hand sides of the wheelchair are
determined from the users position.
3. Secure the 1-inch forward rear wheel positioner to the wheelchair frame
using the two mounting screws, spacers and locknuts.
4. Repeat STEPS 2-3 to Install the left hand 1-inch forward wheel positioner.
5. Reinstall the rear wheels onto the 1-inch forward brackets. Refer to
Removing/Installing Rear Wheels on page 48.
6. If necessary, install the anti-tippers. Refer to Installing/Adjusting
Anti-tippers on page 54.
Part No 1100868
Spacer
Mounting Screw
1-Inch Forward Rear
Wheel Positioner
Mounting Screw
FIGURE 2 Installing the 1-inch Forward Rear Wheel Positioner
67
Invacare® Jymni™ Pediatric Series Wheelchair
12 OPTIONS
Locknuts
Spacer