Adjusting Back Height - Invacare 9000 Standard Weight User Manual

7 SEAT AND BACK
7.3

Adjusting Back Height

WARNING
The seat depth, back height/angle, seat angle, size/position of the front casters, size/position of the rear wheels, anti-tipper model, as well
as the user condition directly relate to the stability of the wheelchair. Any change to one or any combination of these may cause the
wheelchair to decrease in stability. These adjustments must be performed by a qualified technician.
 Back canes MUST be adjusted to the same height.
1. Remove the two mounting screws and locknuts that secure the two back canes to the wheelchair frame.
2. Reposition the back canes to one of the two height adjustment mounting holes.
• 14 inch - Mounting holes* 1 and 2
• 15 inch - Mounting holes* 2 and 3
 Mounting holes numbered from bottom to top for reference only. (There are no numbers on the back canes or wheelchair frame.)
3. Reinstall the two allen screws and locknuts that secure the back canes to the wheelchair frame and securely tighten.
Height Adjustment
Mounting Holes
3
2
1
Invacare® Jymni™ Pediatric Series Wheelchair
Back Cane
Wheelchair
 The two mounting screws and locknuts that secure the back
Frame
cane to the wheelchair frame are not shown for clarity.
FIGURE 3 Adjusting Back Height
46
Part No 1100868