Table of Contents
Advertisement
7 SEAT AND BACK
7 Seat and Back
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
The procedures in this section apply to non-recliner models only. For recliner models, refer to Recliner on page 59.
7.1
Replacing Seat Upholstery
1.
Remove the mounting screws that secure the existing seat upholstery to the seat rails.
10 and 12 inch seat depth has 8 mounting screws and 14 inch seat depths have 10 mounting screws.
2.
Remove the existing seat upholstery from the seat rails.
3.
Install new seat upholstery by reversing STEPS 1-2.
Mounting Screw
Invacare® Jymni™ Pediatric Series Wheelchair
Wheelchair Frame
FIGURE 1 Replacing Seat Upholstery
44
10 or 12-inch Seat Depth
Seat Upholstery
Seat Rail
Part No 1100868
Advertisement
Table of Contents
Troubleshooting
