Invacare 9000 Standard Weight User Manual page 29

❑ Inspect handrims for signs of rough edges or peeling.
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑
Ensure wheel bearings are clean and free of moisture.
❑
Check headtube locknuts for tightness.
❑ Inspect casters for cracks and wear.
❑ Inspect front casters for cracked, bent or broken spokes.
❑ Clean upholstery and armrests.
Inspect/Adjust Weekly
❑ Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑ Inspect tires for flat spots and wear.
❑ Check pneumatic tires for proper inflation.
❑ If equipped, check that quick-release axles lock properly. Lubricate if necessary.
❑
Inspect rear wheels for cracked, bent or broken spokes.
❑
Ensure all spokes are uniformly tight.
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑ Inspect front caster for cracked, bent or broken spokes.
Inspect/Adjust Monthly
❑
Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑
Check that the wheel locks DO NOT interfere with tires when rolling.
❑
Check that the wheel lock pivot points are free of wear and looseness.
❑ Inspect seat and back for loose or broken hardware.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged.
Replace if necessary.
❑
Inspect back cane hand grips for wear/looseness/deterioration.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Check headtube locknuts for tightness.
Part No 1100868
4 SAFETY INSPECTION/TROUBLESHOOTING
29
Invacare® Jymni™ Wheelchair