Configuration Menu (Config Menu) (Models 5230N/Dn, 5350Dn, And 5530Dn); Entering Configuration Menu (Models 5230N/Dn, 5350Dn, And 5530Dn); Available Menus; Maintenance Page Count (Maint Cnt Value) - Dell 5230dn Mono Laser Printer Service Manual

Configuration menu (CONFIG MENU) (models 5230n/dn, 5350dn, and
5530dn)

Entering Configuration Menu (models 5230n/dn, 5350dn, and 5530dn)

1. Turn off the printer.
2. Press and hold
3. Turn on the printer.
4. Release the buttons after ten seconds.
The message CONFIG MENU displays on the top line of the operator panel.

Available menus

Maint Cnt Value
Reset Cnt
Prt Quality Pgs
Reports
SIZE SENSING
Panel Menus
PPDS Emulation
Demo Mode
Factory Defaults
LES Applications
Energy Conserve
Paper Prompts
Env Prompts
Action for Prompts
Font Sharpening
Wiper Messages
Clear Custom Status
Best Speed
Exit Config Menu
Some menus are not available, depending on the configuration of the printer.

Maintenance page count (Maint Cnt Value)

The current value for the maintenance page counter is displayed. This counter tracks printer usage. A print job
containing a single page increments the counter by one and a duplex page by two. At 300,000, the customer is
reminded that the printer requires scheduled maintenance. This counter is reset by the servicer after an 80
Scheduled Maintenance message displays, and a maintenance kit is installed. See
page 6-2
for the part number.
and .
"Maintenance page count (Maint Cnt Value)" on page 3-25
See
See "Maintenance page counter reset (Reset Cnt)" on
page 3-26
See "Print quality pages (Prt Quality Pgs)" on page 3-26
"Reports" on page
See
"SIZE SENSING" on page 3-27
See
See "Panel Menus" on page 3-27
See "PPDS Emulation" on page 3-27
See "Demo Mode" on page 3-27
See "Factory Defaults" on page 3-28
See "LES Applications" on page 3-28
See "Energy Conserve" on page 3-28
"Paper Prompts" on page 3-28
See
"Env Prompts" on page 3-28
See
See "Action for Prompts" on page 3-28
See "Font Sharpening" on page 3-28
See "Wiper Messages" on page 3-28
See "Clear Custom Status" on page 3-28
See "Best Speed" on page 3-29
"Exit Config Menu" on page 3-29
See
3-26.
"Maintenance kit" on
Diagnostic aids
3-25