Sensor (Toner Density) Removal; Standard Bin Actuator Assembly Removal - Dell 5230dn Mono Laser Printer Service Manual

Sensor (standard bin exit) removal
1. Remove standard bin actuator assembly. Go to
2. Release the hooks (A) securing the sensor (standard bin exit) to the assembly.
3. Remove the sensor (standard bin exit).

Sensor (toner density) removal

1. Remove the sensor shield assembly. Go to
2. Remove the two screws (A) securing the sensor (toner density) to the machine.
3. Remove the sensor (toner density).
4. Disconnect the connection (B) to the sensor (toner density).

Standard bin actuator assembly removal

1. Remove the laser cover. Go to
2. Disconnect the connection (A) from the standard bin actuator assembly.
"Sensor shield assembly removal" on page
B
"Laser cover removal" on page
"Sensor (standard bin exit) removal" on page
A
4-26.
4-73.
4-72.
A
Repair Information
4-73