Configuration menu (CONFIG MENU)
Entering Configuration Menu
1.
Turn off the printer.
2.
Press and hold
3.
Turn on the printer.
4.
Release the buttons when Performing Self Test displays.
Available menus
The menus display on the operator panel in the order shown:
Configuration menu settings
Reset PC Cnt
Prt Quality Pgs
Reports
• Menu Settings Page
• Event Log
Panel Menus
PPDS Emulation
Demo Mode
Factory Default
Energy Conserve
Font Sharpening
Exit Configuration Menu
Note: Menus may vary depending on the features and options of the printer.
3-2
and
.
See
"Reset photoconductor maintenance counter (Reset PC
Cnt)" on page
See
"Print quality pages (Prt Quality Pgs)" on page
See
"Reports" on page
See
"Panel Menus" on page
See
"PPDS Emulation" on page
See
"Demo Mode" on page
See
"Factory Defaults" on page
See
"Energy Conserve" on page
See
"Font Sharpening" on page
See
"Exit Configuration Menu (Exit Config Menu)" on page
3-3.
3-3.
3-3.
3-3.
3-4.
3-4.
3-4.
3-4.
3-3.
3-4.