550-sheet pick arm bracket assembly removal
"Media out actuator removal (models 5350dn
1. Remove the 550-sheet media tray assembly. Go to
and 5530dn)" on page
4-159.
2. Remove the two 550-sheet pick arm bracket assembly cable connectors (A) from the 550-sheet controller
card assembly.
3. Detach the 550-sheet bellcrank recoil spring (B) from the drawer.
4. Remove the four screws (C) securing the 550-sheet pick arm bracket assembly to the drawer.
A
5. Remove the 550-sheet pick arm bracket assembly.
4-109
Repair Information