Dell 5230dn Mono Laser Printer Service Manual page 76

Error
code or
message
241.08
241.10
241.11
241.12
241.14
241.15
241.16
2-42
Service Manual
Error contents
Pick motor load error
Source = Media tray 1
Sensor (input) late
jam
Source = Tray 1
Sensor (input) late
jam
Source = Tray 1
Sensor (input) late
jam
Source = Tray 1 or
envelope feeder
Sensor (input) late
jam
Source = Tray 1 or
envelope feeder
Sensor (input) late
jam
Source = Tray 1 or
envelope feeder
Sensor (input) late
jam
Source = Tray 1
Description/Action
The pick motor has failed or
caused high mechanical load
due to paper jam or bind.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
Possible repair actions
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check, clean or replace the
pick rolls for wear and
excess contamination. Go
to "Pick roll assembly
removal" on page 4-57.
4. Check all connections on
the pick arm assembly.
5. Check all connections on
the system card assembly.
6. Replace the pick arm
assembly if problem
remains. Go to "Operator
panel door assembly
removal (T656)" on
page 4-49.
7. Replace system card
assembly if problem
"System
remains. Go to
card assembly removal"
on page 4-76.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-123.
Go to sensor (input) late jam
service check.
"Sensor (input) late jam
See
service check." on
page 2-123.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-123.
Go to sensor (input) late jam
service check.
"Sensor (input) late jam
See
service check." on
page 2-123.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-123.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-123.