Assembly - ProForm PFEX72411.1 User Manual

ASSEMBLY

•• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
•• Assembly requires two persons.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
•• To identify small parts, see page 5.
1. Identify the Front Stabilizer (14), which has a
Leveling Foot (57) near each end.
While a second person lifts the Front Frame
(1), attach the Front Stabilizer (14) to the Front
Frame with two M10 x 75mm Bolts (67).
2. Loosen the Adjustment Knob (11), slide the Rear
Frame (43) out of the Front Frame (1), and then
retighten the Adjustment Knob.
Note: After the exercise bike is assembled, see
HOW TO ADJUST THE SEAT FRAME on page
12 and adjust the Seat (not shown) to the
proper position.
Attach the Rear Stabilizer (2) to the Rear Frame
(43) with two M10 x 75mm Bolts (67) and two
M10 Locknuts (63).
•• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
1
2
63
2
67
6
14
57
57
11
1
43
63
67