ProForm PFEX72411.1 User Manual page 9

8. Orient the Upright (3) and the Top Shield (9) as
shown. Slide the Top Shield upward onto the
Upright.
Have a second person hold the Upright (3) and
the Top Shield (9) near the Front Frame (1).
Connect the Upper Wire (32) to the Lower Wire
(31). Then, connect the Upper Pulse Wire (55) to
the Lower Pulse Wire (56).
Insert the wires downward into the Front
Frame (1).
Tip: To prevent the wires from falling into the
Upright (3), secure the wires with a rubber
band or tape.
9. Tip: Avoid pinching the wires. Slide the
Upright (3) onto the Front Frame (1).
Attach the Upright (3) with four M8 x 16mm
Screws (35) and four M8 Split Washers (36).
Press the Top Shield (9) downward into the Left
and Right Shields (17, 18).
10. Attach the Water Bottle Holder (49) to the
Upright (3) with two M4 x 22mm Screws (69).
8
9
9
3
9
36
35
17
18
10
49
69
9
3
55
32
56
31
1
Avoid pinching
35
the wires
36
35
36
1
36
35
3