Part Identification Chart - ProForm PFEX72411.1 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M6 Washer
M8 Split M8 Locknut M10 Locknut
(70)––8
Washer (36)––4 (37)––6 (63)––2
M4 x 16mm M6 x 25mm
M4 x 22mm M6 x 40mm
Screw (8)––6 Screw (69)––2 Screw (72)––2
Screw (40)––8
M8 x 38mm M8 x 65mm
M8 x 16mm
Bolt (71)––2
Bolt (53)––4
Screw (35)––4
M10 x 75mm
Bolt (67)––4
5