ProForm PFEX72411.1 User Manual page 7

3. Tip: Avoid pinching the wires. Attach
the Seat Frame (5) to the Seat Handlebar (44)
with two M8 x 65mm Bolts (71) and two M8
Locknuts (37).
4. Have a second person hold the Seat Handlebar
(44) near the top of the Rear Frame (43) until
step 5 is completed.
Connect the Contact Pulse Wire (45) to the
Lower Pulse Wire (56).
Insert the Lower Pulse Wire (56) and the Contact
Pulse Wire (45) into the Rear Frame (43). Then,
press the grommet (A) into the hole in the Rear
Frame.
5. Tip: Avoid pinching the wires. Attach the Seat
Frame (5) to the Rear Frame (43) with two M6 x
25mm Screws (72).
3
5
44
37
4
56
45
A
44
5
5
72
7
71
Avoid pinching
the wires
43
43
72
Avoid pinching
the wires