6.7
Installing/Removing Elevating Legrests
MyOn and MyOn Heavy Duty
Installing
1.
Place elevating legrest (A) on the outside of the wheelchair and insert mounting pin (B) of the legrest into the mounting tube (C) of the wheelchair.
2.
Rotate elevating legrest toward the inside of the wheelchair until it locks in place.
The calfpad (D) of the legrest will be on the inside of the wheelchair when locked in place.
3.
Repeat STEPS 1-2 for the other elevating legrest assembly.
FIGURE 14
Part No 1167418
A
B
Installing/Removing Elevating Legrests - MyOn and MyOn Heavy Duty - Installing
C
D
47
6 WHEELCHAIR OPERATION
™
Invacare® MyOn
MyOn Jr Wheelchairs