Installing/Removing Elevating Legrests - Invacare XTERRA GT User Manual

5.9

Installing/removing elevating legrests

Installing
1. Turn legrest to side (open footplate is perpen-
dicular to wheelchair) and position mounting
holes in the legrest hinge plates with hinge pins
on the wheelchair frame.
2. Install the legrest hinge plates onto the hinge
pins on the wheelchair frame.
3. Rotate legrest toward the inside of the wheel-
chair until it locks in place.
NOTE:
The footplate will be on the inside of the wheelchair when locked in place.
4. Repeat STEPS 1-3 for the opposite legrest.
5. After seated in wheelchair, adjust footplate to
correct height by loosening nut and sliding the
lower footrest assembly up or down until
desired height is achieved.
Hinge Pins
Hinge Plates
Legrest Release Handle
Bolt/Nut
Calfpad
Legrest
45