Invacare MyOn User Manual page 35

 Adjustable height arms operate and lock securely.
 Armrest pad sits flush against arm tube.
 All fasteners on clothing guards are secure.
 Seat and/or back upholstery have no rips.
Inspect adjustable angle back attaching hardware is securely tightened.

No excessive side movement or binding when rear wheels are lifted and spun.

Inspect handrims for signs of rough edges or peeling finish.

Inspect tires/casters for flat spots and wear.

Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).

Wheel lock pivot point are free of wear and looseness.

 Clean upholstery and armrests with mild soap and water.
 Sealed bearings and axle nut tension are correct.
 Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
 Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
 Wheel bearings are clean and free of moisture.
 Wheel locks are easy to engage.
Clean quick-release axles with a Teflon lubricant.

Ensure axles are free from dirt, lint, etc.

Ensure roller bearings are free from dirt, lint, etc.

Adjust wheel locks as tires wear.

Clean and wax all parts.

Ensure casters are free of debris.

 Clean upholstery and armrests with mild soap and water.
 Check that all labels are present and legible. Replace if necessary.
Part No 1167418
35
5 SAFETY INSPECTION
™
Invacare® MyOn MyOn Jr Wheelchairs