Seat/Back; Removing/Installing The Back - Invacare MyOn User Manual

12 SEAT/BACK

12 Seat/Back
WARNING
The seat height, seat depth, back angle, seating system, size/position of the rear wheels, size/position of the front casters, as
well as the user condition directly relate to the stability of the wheelchair. Any change to one or any combination of the
nine may cause the wheelchair to decrease in stability. These adjustments MUST be performed by a qualified technician.
WHEELCHAIRS WITH TRRO ONLY - The seat depth and center of gravity are factory set. DO NOT adjust the seat
depth or center of gravity - otherwise injury or damage may occur. Contact Invacare for service.
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.

12.1 Removing/Installing the Back

Removing
1. Remove the mounting screw (A) and locknut (B) that secures the back cane (C) to the back cane bracket (D).
2. Repeat STEP 1 for remaining back cane.
3. Remove the back canes out of the back cane brackets.
Install
1. Place the back cane (C) in the back cane brackets (D).
2. Secure the back cane in back cane bracket with mounting screw (A) and locknut (B). Tighten securely.
3. Repeat STEP 1 for remaining back cane.
™
Invacare® MyOn MyOn Jr Wheelchairs
84
Part No 1167418