Removing/Installing The Caster Assemblies - Invacare MyOn User Manual

13 REAR WHEELS/FRONT CASTERS

13.5 Removing/Installing the Caster Assemblies

 If replacing a front caster note the mounting position of the existing front caster for installation of the new front caster.
If repositioning front casters or replacing the existing front caster with a caster of a different size, refer to "Changing the
front seat to floor height" in the service manual to determine the front caster position needed for the required front
seat-to-floor height.
Both front casters MUST be the same size and adjusted to the same height.
Removing Front Caster
1. Note mounting position
1. Remove the mounting bolt (A), axle spacers (B) and locknut (C)
that secure the front caster (D) to the fork (E).
2. Remove the caster from the fork.
Installing Front Caster
1. Secure the front caster (D) to the caster mounting position noted
in STEP 1 with mounting bolt (A), axle spacers (B), and locknut (C).
2. Ensure fork stem is perpendicular to the flat surface. Refer to
Removing/Installing the Caster Assemblies on page 98.
™
Invacare® MyOn MyOn Jr Wheelchairs
A
B
FIGURE 6 Removing/Installing the Caster Assemblies
98
E
C
B
Part No 1167418
D