1. Manuals
  2. Brands
  3. Invacare Manuals
  4. Wheelchair
  5. MyOn
  6. User manual

Invacare MyOn User Manual

Hide thumbs Also See for MyOn:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Enlarged version
™
Invacare® MyOn
MyOn Jr Wheelchairs

User Manual

EN
This manual MUST be given to the user of the product.
BEFORE using this product, read this manual and save for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Invacare MyOn

Summary of Contents for Invacare MyOn

  • Page 1: User Manual

    ™ Invacare® MyOn MyOn Jr Wheelchairs User Manual This manual MUST be given to the user of the product. BEFORE using this product, read this manual and save for future reference.
  • Page 2 © 2013 Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by ™ and ®. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted.

  • Page 3: Table Of Contents

    Transferring To and From Other Seats......................................29 Percentage of Weight Distribution........................................30 Reaching, Leaning and Bending - Forward...................................... 31 Reaching, Bending - Backward .......................................... 31 SAFETY INSPECTION Safety Inspection Checklists ..........................................32 WHEELCHAIR OPERATION ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 4 Maintenance ................................................65 Transporting the Wheelchair..........................................67 10 FRONT RIGGINGS Adjusting Footrest Height..........................................68 Replacing Heel Loop Strap..........................................69 Installing Impact Guards/Calf Strap........................................70 Adjusting Elevating Legrest Calfpad Height and Depth................................70 ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 5 Adjusting the Height Adjustable Back ......................................90 Adjusting the Back Angle ........................................... 91 Removing/Installing the Seat Positioning Strap....................................92 Installing/Removing the Spreader Bar ......................................92 13 REAR WHEELS/FRONT CASTERS Removing/Installing Rear Wheels........................................93 Adjusting Quick-Release Axles......................................... 95 ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 6 Adjusting Forks..............................................97 Removing/Installing the Caster Assemblies ....................................98 Replacing the Sector Block ..........................................99 14 WHEEL LOCKS Adjusting Wheel Locks.............................................100 Replacing Wheel Lock Handle........................................102 15 ANTI-TIPPERS Installing Anti-Tippers ............................................103 Adjusting Anti-Tippers............................................104 ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 7: General

    Caution indicates a potentially hazardous situation which, if not avoided, may result in property damage or minor injury or both.  Gives useful tips, recommendations and information for efficient, trouble-free use. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 8: Limited Warranty

    This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. Invacare warrants its product to be free from defects in materials and workmanship for a period of one year from the date of purchase when purchased new and unused from Invacare or an authorized provider.

  • Page 9: Safety

    Invacare and are not recommended for use with Invacare products. NOTICE THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. Check all parts for shipping damage and test before using. In case of damage, DO NOT use. Contact Invacare/Carrier for further instruction. WARNING Wheelchair User As a manufacturer of wheelchairs, Invacare endeavors to supply a wide variety of wheelchairs to meet many needs of the end user.
  • Page 10 As of this date, the Department of Transportation has not approved any tie-down systems for transportation of a user while in a wheelchair, in a moving vehicle of any type. It is Invacare’s position that users of wheelchairs should be transferred into appropriate seating in vehicles for transportation and use be made of the restraints made available by the auto industry.
  • Page 11 • SEAT HEIGHT SEAT DEPTH • • BACK ANGLE SEATING SYSTEM/UPHOLSTERY • • CASTER SIZE CASTER POSITION • • REAR WHEEL SIZE REAR WHEEL POSITION • • USER CONDITION ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 12: Operating Information

    DO NOT attempt to move up or down an incline with a water, ice or oil film. DO NOT attempt to ride over curbs or obstacles. Doing so may cause your wheelchair to turn over and cause bodily harm or damage to the wheelchair. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 13 H-blocks. Anti-tippers MUST BE attached at all times. Inasmuch as the anti-tippers are an option on this wheelchair (you may order with or without the anti-tippers), Invacare strongly recommends ordering the anti-tippers as an additional safeguard for the wheelchair user.

  • Page 14: Weight Training

    Weight Training Invacare does not recommend the use of its wheelchairs as a weight training apparatus. Invacare wheelchairs have not been designed or tested as a seat for any kind of weight training. If occupant uses said wheelchair as a weight training apparatus, Invacare shall not be liable for bodily injury or physical disability and the warranty will be void.

  • Page 15: Overview

    3 Overview Label Locations All Wheelchairs Patent Label Serial Number Label Location MyOn (Standard) MyOn Jr without TRRO Option MyOn HD WEIGHT CAPACITY MyOn Jr with LIMITE DE POIDS Detent balls should extend beyond the diameter of the WARNING axle bushing for a positive lock. Keep detent balls (Heavy Duty) 350 LBS.
  • Page 16 3 OVERVIEW Wheelchairs with Transport Ready Option Wheelchairs without TRRO Auto style seat positioning strap shown. This label is also on the airline style seat positioning strap. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 17: Component Identification

    3 OVERVIEW Component Identification Backrest Seat Upholstery Rear Wheel Swing Away Legrest Adjustable Footrest Tube Rear Wheel Axle Handrim Footplate Front Caster Wheel Lock Wheelchair Frame ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 18: Typical Product Parameters

    16, 17, 18, 19, and 20 inches 8 - 15 inches in 1 inch 16-20 inches in 1 inch increments increments OVERALL DEPTH inches inches inches min. (WITH RIGGINGS): inches max ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 19 SEAT TO FLOOR: BACK STYLE: Fixed Height with push handles Folding Back, Fixed Height with push handles Adjustable Height with push handles Adjustable Height without push handles Adjustable angle back with push handles ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 20 • 12-16 inch range* • 15-19 inch range* • 15-19 inch range*  * 0° Back cane angle. **8° Back cane angle. -6° to 15° ADJUSTABLE BACK ANGLE (OPTIONAL): ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 21 90° Straight Lift Off Hanger Elevating Legrest Swing-in/ Elevating Legrest Swing-in/ Swing-out Swing-out FOOTPLATE: Flip up footplates Flip up, adjustable angle One Piece Footplate REAR AXLE: Permanent Permanent Quick-Release Quick-Release Quick-Release ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 22 Pull to Lock (clamp on) Push-to-lock (clamp on) Pull to Lock with wheel lock extension (clamp on) Push-to-lock with wheel lock extension (clamp on) Hill Holder (clamp on) Hideaway/Undermount Hill Holder ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 23 WEIGHT CAPACITY: 275 lbs (125 Kg) 165 lbs (75 Kg) with TRRO 350 lbs (159 Kg) 175 lbs (85 Kg) w/o TRRO SHIPPING WEIGHT 34 lbs 34 lbs 34 lbs (APPROXIMATE): ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 24: Safety/Handling Of Wheelchairs

    Use this information only as a “basic” guide. The techniques that are discussed on the following pages have been used successfully by many. Individual wheelchair users often develop skills to deal with daily living activities that may differ from those described in this manual. Invacare recognizes and encourages each individual to try what works best for him/her in overcoming architectural obstacles that they may encounter, however all warnings and cautions given in this manual MUST be followed.

  • Page 25: Coping With Everyday Obstacles

    Virtually all activities which involve movement in the wheelchair have an effect on the center of gravity. Invacare recommends using seat positioning straps for additional safety while involved in activities that shift your weight.
  • Page 26 NOT return the front casters to the ground until the wheelchair has been pulled backward far enough for the front casters to clear the edge FIGURE 2 Method 2 - Wheelchair without Step Tubes of the curb. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 27: Stairways

    Extreme caution is advised when it is necessary to move an occupied or unoccupied wheelchair up or down the stairs. Invacare recommends that, if possible, the user be removed from the wheelchair prior to moving. Invacare recommends using two assistants and making thorough preparations. Make sure to use only secure, non-detachable parts for hand-held supports.

  • Page 28: Escalators

    If necessary, rotate the anti-tippers so the wheels are facing down. FIGURE 3 Stairways Escalators WARNING DO NOT use an escalator to move a wheelchair between floors. Serious bodily injury may occur. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 29: Transferring To And From Other Seats

    Engage wheel locks and fold down the wheel lock handles. Remove or flip back armrests. FIGURE 4 Transferring To and From Other Seats Shift body weight into seat with transfer. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 30: Percentage Of Weight Distribution

    WHEELCHAIRS WITH TRRO ONLY - The center of gravity is factory set. DO NOT adjust the center of gravity - otherwise injury or damage may occur. Contact Invacare for service. Many activities require the wheelchair owner to reach, bend and transfer in and out of the wheelchair. These movements will cause a change to the normal balance, the center of gravity, and the weight distribution of the wheelchair.

  • Page 31: Reaching, Leaning And Bending - Forward

    Position wheelchair as close as possible to the desired object. Point front casters forward to create the longest possible wheelbase. Reach back FIGURE 7 Reaching, Bending - Backward only as far as your arm will extend without changing your sitting position. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 32: Safety Inspection

    No excessive side movement or binding when rear wheels are lifted and spun.  Quick-release axles lock properly. Inspect handrims for signs of rough edges or peeling finish.  Inspect for broken spokes.  ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 33 Clean upholstery and armrests with mild soap and water.  Ensure casters are free of debris.  Clean upholstery and armrests with mild soap and water.  Check that all labels are present and legible. Replace if necessary. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 34 Tighten mounting screw if loose. Inspect/Adjust Periodically Wheelchair rolls straight (no excessive drag or pull to one side).  Arms are secure but easy to release and adjustment levers engage properly.  ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 35 Clean and wax all parts.  Ensure casters are free of debris.   Clean upholstery and armrests with mild soap and water.  Check that all labels are present and legible. Replace if necessary. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 36: Wheelchair Operation

    Pinch point may occur at the point where the seat rail contacts the H-block. Engage both wheel locks, open the footrest/legrest for clearance and transfer into the wheelchair. For models equipped with push handles, refer to Securing the Optional Push Handle on page 38. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 37 With both hands, grasp the middle of the seat upholstery (A) at the front and back edge and lift up. CAUTION DO NOT allow upholstery to hang between the cross braces. FIGURE 2 Folding the Wheelchair ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 38: Securing The Optional Push Handle

    Unfold the chair. Refer to Unfolding and Folding Wheelchair on page 36 Remove the lever (A) by turning counter clockwise. Rotate the push handle bar (B) to horizontal position. FIGURE 3 Securing the Optional Push Handle - MyOn Jr ™ Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 39 6 WHEELCHAIR OPERATION Rotate the push handle bar (B) to the vertical position. Rotate the push handle bar (B) to approx. 45° angle. 45° FIGURE 4 Securing the Optional Push Handle - MyOn Jr ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 40 Rotate push handle (B) down until clamp (E) encompasses threads of lever. Secure lever and clamp to push handle by rotating lever clockwise. FIGURE 5 Securing the Optional Push Handle - MyOn Jr MyOn and MyOn Heavy Duty Rotate the knob (A) counter clockwise to loosen but do not remove.

  • Page 41: Placing The Optional Push Handle In The Storage Position

    6 WHEELCHAIR OPERATION FIGURE 6 Securing the Optional Push Handle - MyOn and MyOn Heavy Duty 6.3 Placing the Optional Push Handle in the Storage Position Remove the lever (A) from left hand back cane (B). Rotate and swivel push handle bar (C) into storage position as shown.

  • Page 42: Using Wheel Locks

    To disengage, (from the seated position) pull the wheel lock handle (A) rearward until the wheel lock shoe (B) disengages the wheel (C). FIGURE 8 Using Wheel Locks - Push to Lock ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 43: Folding Wheel Lock Handles

    To disengage, (from the seated position) push the wheel lock handle forward until the wheel locks shoe disengages the wheel. FIGURE 9 Using Wheel Locks - Pull to Lock Folding Wheel Lock Handles Pull up and back on the wheel lock handle (A). FIGURE 10 Folding Wheel Lock Handles ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 44: Installing/Removing Front Riggings

     The footplate will be on the inside of the wheelchair when locked in place. Repeat this procedure for the other front rigging assembly. FIGURE 11 Installing/Removing Front Riggings - MyOn and MyOn Heavy Duty ™ Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 45 Pull the front rigging release lever (A). If desired, rotate front rigging assembly (B) outward or inward. Lift the front rigging assembly off of the mounting tube (C). FIGURE 12 Installing/Removing Front Riggings - MyOn and MyOn Heavy Duty MyOn JR Installing ...
  • Page 46 Rotate front rigging (A) toward inside of wheelchair. Lift front riggng up and off of wheelchair frame. Repeat this procedure for the other front rigging assembly. FIGURE 13 Installing/Removing Front Riggings - MyOn JR ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 47: Installing/Removing Elevating Legrests

    The calfpad (D) of the legrest will be on the inside of the wheelchair when locked in place. Repeat STEPS 1-2 for the other elevating legrest assembly. FIGURE 14 Installing/Removing Elevating Legrests - MyOn and MyOn Heavy Duty - Installing ™ Part No 1167418 Invacare®...
  • Page 48 Lift the elevating legrest up and out of the mounting tube (C) of the wheelchair frame. Repeat STEPS 1-2 for opposite side, if necessary. FIGURE 15 Installing/Removing Elevating Legrests - MyOn and MyOn Heavy Duty - Removing MyOn Jr Installing Insert the mounting pin (A) of the elevating legrest (B) into the mounting tube (C) on the wheelchair frame (Detail “A”).
  • Page 49 Detail “A” Detail “B” Detail “C”  Ensure elevating legrest is pushed all the way down into the mounting tube. Only a minimal gap should appear between mounting pin and mounting tube. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 50: Raising/Lowering The Elevating Legrest

    Lift or lower elevating legrest to one of seven preset angle positions (C). Release angle adjustment knob and legrest will lock in place. FIGURE 16 Raising/Lowering the Elevating Legrest - MyOn and MyOn Heavy Duty MyOn Jr With one hand supporting the elevating legrest (A), turn the adjustment knob (B) counterclockwise.

  • Page 51: Using Flipback Armrest

    6 WHEELCHAIR OPERATION FIGURE 17 Raising/Lowering the Elevating Legrest - MyOn Jr Using Flipback Armrest. WARNING Make sure the armrest release lever is in the locked position before using the wheelchair. Perform one of the following: • For transferring - depress the button (A) and rotate the armrest (B) backward.
  • Page 52 6 WHEELCHAIR OPERATION FIGURE 18 Using Flipback Armrest. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 53: Transport Ready Option

    7 Transport Ready Option WARNING Contact Invacare Corporation (800-333-6900) with any questions about using this wheelchair for seating in a motor vehicle. When feasible, wheelchair occupants should transfer into the vehicle seat and use the OEM (Original Equipment Manufacturer) vehicle-installed restraint system.

  • Page 54: About Transport Ready Packages

    RESNA WC Vol 1 Section 19 Frontal Impact Test requirements for: a) MyOn wheelchair with a 172 lb crash dummy, which corresponds to a person with a weight of 165 to 300 lbs.) MyOn Jr. wheelchair with a 130 lb crash dummy, which corresponds to a person with a weight of 125 to 165 lbs.

  • Page 55: Compliance Information

    Only wheelchairs which fit in the following size ranges should be occupied in a motor vehicle:12 to 22 inches wide and 12 to 22 inches deep Weight Limit - MyOn up to 275 pounds; MyOn Jr. up to 165 pounds with TRRO option. MyOn Jr. up to 175 pounds without TRRO option.

  • Page 56: Securing The Wheelchair To The Vehicle

    The estimated seated height (HHT) from the ground or floor to the top of the wheelchair-seated occupant’s head ranges from approximately 47-inches for a small adult female to about 61-inches for a tall adult male 16in. (Frontal Clear Zone) 8in. 8in. Side View 16in. (Frontal Clear Zone) Top View ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 57 7 TRANSPORT READY OPTION Securement Points TRRO TRBKTS Tie-Down Bracket Tie-Down Bracket Tie-Down Tie-Down Bracket Brackets Tie-Down Tie-Down Bracket Tie-Down Bracket Bracket FIGURE 1 Securement Points ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 58: Securing The Occupant

    Wheelchair-Anchored Belts WARNING The pelvic belt that is provided by Invacare has been tested for use in a motor vehicle on this wheelchair only. DO NOT replace the pelvic belt with a different style pelvic belt. The wheelchair has been provided with a pelvic belt which meets the requirements of ANSI/RESNA WC/19.
  • Page 59 7 TRANSPORT READY OPTION The pelvic belt provided by Invacare has been designed to accommodate use on either side of the vehicle. DETAIL “A” - PELVIC BELT Pelvic Belt Tie-Down Bracket (Used to secure the vehicle- anchored upper torso belt.) FIGURE 2 Wheelchair-Anchored Belts...
  • Page 60 The test for Lateral Stability Displacement for Point (P) is shown in FIGURE 3. The average test result for point (P) is 0.65-inches (16.5 mm). Rear View Point (P) NOTE: Rear view of wheelchair and human surrogate secured on test platform and tilted to 45 degrees. Test Platform 45° FIGURE 3 Vehicle-Anchored Belts ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 61: Positioning Belts

    Steeper belt angles also reduce the tendency for upper-torso belts to pull the pelvic belt onto the abdomen during frontal impact loading. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 62 Adjust belts as firmly as possible, being mindful of user comfort. DO position belts INSIDE of DO NOT position belts OUTSIDE of armrests, wheels, etc. armrests, wheels, etc. FIGURE 4 Positioning Belts ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 63: Maintenance And Adjustment Sections

    MAINTENANCE AND ADJUSTMENT SECTIONS Wheel Locks on page 100 Arms on page 75 Seat/Back on page 84 Seat/Back on page 84 Front Riggings on page 68 Rear Wheels/Front Casters on page 93 ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 64: Troubleshooting And Maintenance

    Initially and at least every six months, follow these maintenance procedures: Troubleshooting SOLUTIONS If pneumatic tires, check for correct and equal pressure. Check for loose stem nuts/bolts. Check caster angle adjustment. Check that casters contact ground at the same time. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 65: Maintenance

    DO NOT overinflate the tires. Failure to follow these suggestions may cause the tire to explode and cause bodily harm. The recommended tire pressure is on the sidewall of the tire. Recommended tire pressure is listed on the sidewall of the tire. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 66 Invacare recommends that rear wheel tire/tube and caster tire/tube be replaced every five years. Regularly check for loose spokes in the rear wheels. If loose, have them adjusted. Contact a qualified technician or Invacare customer support at the telephone numbers on the back of this manual.

  • Page 67: Transporting The Wheelchair

    14. Clean upholstery with mild soap and water. Replacing/Repairing Rear Wheel Tire/Tube WARNING Replacement of solid urethane tires is not recommended. If the solid urethane tire needs repaired, Invacare recommends replacing the complete wheel assembly. Replacement of rear wheel tube must be performed by a qualified technician.

  • Page 68: Front Riggings

    Adjust the footrest (B) to the desired height. Securely tighten mounting screw after adjustment. If necessary, repeat STEPS 2-4 to adjust remaining footrest. Standard Elevating Footrest Legrest FIGURE 1 Adjusting Footrest Height - MyOn and MyOn Heavy Duty ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 69: Replacing Heel Loop Strap

    Adjust footrest (C) to desired height. Rotate adjustment knob clockwise to tighten and secure in place. FIGURE 2 Adjusting Footrest Height - MyOn Jr 10.2 Replacing Heel Loop Strap Disconnect the hook portion of the heel loop strap (A) from the loop portion of the heel loop strap.

  • Page 70: Installing Impact Guards/Calf Strap

    (B) to the elevating legrest assembly (C). Adjust the calfpad bracket up or down to desired height. Securely tighten the adjustment knob. If necessary, repeat STEPS 1-3 to adjust remaining calfpad bracket. FIGURE 5 Adjusting Calfpad Height ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 71: Replacing Mounting Pin On 80° And 90° Front Rigging

    Secure the calfpad to one of four depth adjustment holes (F) using the mounting screw, washer and locknut. Tighten securely. If necessary, repeat STEPS 1-3 to adjust remaining calfpad assembly.  Depth adjustment is only available on MyOn and MyOn Heavy Duty. FIGURE 6 Adjusting Calfpad Depth 10.5 Replacing Mounting Pin on 80°...

  • Page 72: Installing Adjustable Angle Flip-Up Footplate Hinge

    If the footplate's motion is: • too tight, loosen the socket screw and locknut approximately turn. • too loose, tighten the socket screw and locknut approximately turn. FIGURE 8 Installing Adjustable Angle Flip-Up Footplate Hinge ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 73: Adjusting Adjustable Angle Flip-Up Footplates

    Retighten the adjustment screw. Torque to over 90 in-lbs, but no more than 300 in-lbs. Repeat STEPS 1-3 for opposite footplate, if desired. Screw in or out until the adjustable angle flip-up footplate is perpendicular to the footrest assembly or the desired inversion/eversion is obtained. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 74 10 FRONT RIGGINGS 90° Footrest Support 90° Footrest Support Detail “A” - Side View of Footplate and Footrest Support FIGURE 9 Adjusting Adjustable Angle Flip-Up Footplates ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 75: Arms

    Secure the height adjustment screw and locknut in one of the three height adjustment holes (C). Tighten to 50 inch pounds of torque. Reinstall the T-arm. Refer to Removing/Installing T-Arms on page 75. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 76 After re-installing the T-arm, ensure the adjustment nut does not interfere with the wheel spokes. If interference occurs, loosen adjustment nut and refer to STEP 3. Adjusting Removing/Installing FIGURE 1 Removing/Installing and Adjusting T-Arms ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 77: Removing/Installing Flipback Armrests

    (B) may occur. Push bottom of armrest forward onto bushing until armrest locks in place. Place armrest in position for using. Refer to Using Flipback Armrest. FIGURE 2 Removing/Installing Flipback Armrests on page 51. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 78: Adjusting The Height And Depth Of The Flip Back Arms

    Tighten mounting screw. Adjusting Depth Loosen the two mounting screws (D). Slide armrest pad (E) to desired depth. Retighten mountings screws. FIGURE 3 Adjusting the Height and Depth of the Flip Back Arms ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 79: Replacing Armrest Arm Pad

    From the outside of the frame, thread one mounting screw (C) with washer (D) through axle mounting bracket (E), back cane bracket (F), wheel chair frame (B), and armrest tube (A). ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 80 Install washer (G) and locknut (H). Securely tighten both mounting screws. View from Underneath Frame View from Inside of Frame View from Outside of Frame C, D FIGURE 5 Installing the Optional Swingaway Padded Armrest Socket Assembly ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 81: Adjusting Swingaway Padded Armrest Height

    (D) with the remaining washer and locknut. Reinstall the half arm into the arm socket. Repeat STEPS 1-5 for the opposite side, if necessary. Three Mounting Positions FIGURE 6 Adjusting Swingaway Padded Armrest Height ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 82: Using The Locking Cantilever Arms

    Remove the clamp (C) and cantilever arm (E) from the back cane (D). Installing Secure the cantilever arm (E) to the back cane with two mounting screws (A), washers (B) and clamp (C). Tighten securely. FIGURE 8 Removing/Installing Locking Cantilever Arms ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 83: Adjusting Locking Cantilever Arm Height

    Securely tighten the locking pin (B) and washer (E) to the adjustment plate with a locknut. Repeat STEPS 1-4 for the opposite side, if necessary. FIGURE 10 Adjusting the Locking Cantilever Arm Angle ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 84: Seat/Back

    WHEELCHAIRS WITH TRRO ONLY - The seat depth and center of gravity are factory set. DO NOT adjust the seat depth or center of gravity - otherwise injury or damage may occur. Contact Invacare for service. After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur.
  • Page 85 12 SEAT/BACK FIGURE 1 Removing/Installing the Back ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 86: Removing/Installing Seat Upholstery

    Remove the mounting screws (A) that secures the seat upholstery (B) to the front and back seat rails (C). Remove the endcaps (D) from the front of the seat rails. Slide the seat upholstery out of the seat rails. FIGURE 2 Removing/Installing Seat Upholstery ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 87: Removing/Installing Standard Back Upholstery

    The second is to keeps the cushion from sliding out of the back of the wheelchair. The third is a sacral support depending upon how far or tight the seat portion of the back upholstery is pulled under the seat cushion. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 88: Installing/Replacing Adjustable Back Upholstery

    Remove the two mounting screws and washers (D) that secure each anchor loop/fastening strap section to the back canes. Slide each anchor loop/adjuster strap section off of the back canes. Install new adjustable back upholstery. Refer to Installing Adjustable Back Upholstery on page 88. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 89 12 SEAT/BACK FIGURE 4 Installing/Replacing Adjustable Back Upholstery ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 90: Adjusting The Height Adjustable Back

    Reposition the back cane to one of five height adjustment holes (E) in the back cane support. Reinstall the height adjustment screw and locknut and securely tighten. Repeat STEPS 1-3 for remaining back cane. A, B FIGURE 5 Adjusting the Height Adjustable Back ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 91: Adjusting The Back Angle

    Retighten mounting screw (B) and then mounting screw (A).  Back canes MUST be adjusted to same back angle. Repeat STEPS 1-5 for remaining back cane. FIGURE 6 Adjusting the Back Angle ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 92: Removing/Installing The Seat Positioning Strap

    Align the spreader bar (E) ends with the handles of the back canes. Mounting Screw Secure the spreader bar to the back canes with the mounting bolts FIGURE 8 Installing/Removing the Spreader Bar (F). ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 93: Rear Wheels/Front Casters

    WHEELCHAIRS WITH TRRO ONLY - The caster headtube is factory set. DO NOT remove or adjust caster headtube - otherwise injury or damage may occur. Contact Invacare for service. After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur.
  • Page 94 Push in the tip of the quick-release axle again and pull the quick-release axle out of the existing rear wheel. Install new/existing rear wheel onto wheelchair. Refer to Removing/Installing Rear Wheels on page 93. FIGURE 2 Removing/Installing Rear Wheels - Quick-Release Axles ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 95: Adjusting Quick-Release Axles

    The locking pins MUST be protruding past the inside of rear wheel hub for a positive lock. Keep locking pins clean. Invacare recommends inserting quick-release axles with the head end to the inside of the wheelchair to prevent accidental release during contact activities.

  • Page 96: Replacing Handrims

    Install the new handrim and secure to the rear wheel with the existing mounting screws. Reinstall the rear wheel to the wheelchair. Refer to Removing/Installing Rear Wheels on page 93. Repeat STEPS 1-5 for opposite wheel, if necessary. FIGURE 4 Replacing Handrims ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 97: Adjusting Forks

    Repeat STEPS C-D until the wheels swing once to one-side, then immediately rest in a straight downward position. Test wheelchair for maneuverability. Snap dust cover into the caster headtube. FIGURE 5 Adjusting Forks ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 98: Removing/Installing The Caster Assemblies

    STEP 1 with mounting bolt (A), axle spacers (B), and locknut (C). Ensure fork stem is perpendicular to the flat surface. Refer to Removing/Installing the Caster Assemblies on page 98. FIGURE 6 Removing/Installing the Caster Assemblies ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 99: Replacing The Sector Block

    Remove the mounting screw (A) securing the existing sector block (B) to the wheel chair frame (C). Remove the existing sector block from the wheelchair frame. Secure new sector block to wheelchair with mounting screw. Tighten securely. MyOn and MyOn Jr MyOn HD FIGURE 7 Adjusting Forks ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 100: Wheel Locks

    Install the wheel lock assembly into the clamp assembly. Secure the wheel lock assembly to the wheelchair frame with the two mounting screws. Repeat STEPS 1 to 5 for the other wheel lock assembly. FIGURE 1 Adjusting Wheel Lock Position ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 101 Engage the wheel locks and push against the wheelchair to determine if the wheel locks engage the rear wheels enough to hold the occupied wheelchair. Repeat STEPS 1-6 until the wheel locks engage the rear wheels enough to hold the occupied wheelchair. Measure This Distance FIGURE 2 Adjusting Wheel Locks- Adjusting Wheel Lock Tension. ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...

  • Page 102: Replacing Wheel Lock Handle

    Align the new wheel lock handle with the wheel lock assembly. Secure the new wheel lock handle with the mounting screw and locknut. If necessary, repeat STEPS 1 to 4 for the other wheel lock. FIGURE 3 Replacing Wheel Lock Handle. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...

  • Page 103: Anti-Tippers

    Anti-tippers MUST be attached at all times. Inasmuch as the anti-tippers are an option on this wheelchair (you may order it with or without the anti-tippers), Invacare strongly recommends ordering the anti-tippers as an additional safeguard for the wheelchair user.

  • Page 104: Adjusting Anti-Tippers

    Press the release buttons (A) on the wheeled portion of the anti-tipper and slide it up or down to achieve the 1 to 2-inch clearance. Check to make sure that the release buttons are fully engaged in adjustment holes. ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 105 NOTES ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 106 NOTES ™ Invacare® MyOn MyOn Jr Wheelchairs Part No 1167418...
  • Page 107 NOTES ™ Part No 1167418 Invacare® MyOn MyOn Jr Wheelchairs...
  • Page 108 Invacare Corporation One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 www.invacare.com Part No 1167418 Rev B - 1/13...

This manual is also suitable for:

Myon jr

Table of Contents