Heat Sink - HP 250R G9 Maintenance And Service Manual

5. Remove the fan (5) from the computer.
To install the fan, reverse this procedure.

Heat sink

To remove the heat sink, use these procedures and illustrations.
Table 5-13 Heat sink description and part number
Description
Heat sink
NOTE: You can remove the heat sink and the system board at the same time.
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the heat sink:
1. In the order indicated on the heat sink, remove the four Phillips M2.0 × 2.8 screws (1) that secure the
heat sink to the system board.
46 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 32).
31).
Spare part number
N08727-001
31).