Heat Sink - HP ProBook 465 G11 Maintenance And Service Manual

Before removing the I/O board cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
4. Remove the WWAN module (see
5. Remove the SSD (see
6. Remove the fan (see
7. Remove the system board (see
Remove the I/O board cable:
1. Turn the system board upside down with the front toward you.
2. Release the ZIF connectors (1) the I/O board cable and nano SIM cable are connected to, and then
disconnect the I/O board cable (2) and nano SIM cable from the system board.
To replace the I/O board cable, reverse the removal procedures.

Heat sink

To remove the heat sink, use these procedures and illustrations.
Table 5-11 Heat sink description and part number
Description
Heat sink (includes replacement thermal material)
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
4. Remove the WWAN module (see
56 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
WWAN module on page
Solid-state drive on page
Fan on page 50).
System board on page
Preparation for disassembly on page
Bottom cover on page
WWAN module on page
39).
Battery on page
43).
45).
52).
39).
Battery on page
43).
39).
41).
Spare part number
N96443-001
39).
41).