Radar Display Appearance - Garmin GPSMAP 700 Owner's Manual

Radar
Adjusting Crosstalk Clutter on the Radar Screen
You can reduce the appearance of clutter caused by interference from another nearby radar source.
On is the default value for the crosstalk setting.
NOTE: Depending upon the radar in use, the crosstalk setting configured for use in one radar mode
may or may not be applied to other radar modes
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, Offshore, or
3. Select Menu > Noise Rejection

Radar Display Appearance

Radar Overlay Numbers
Overlay numbers with data fields can appear on all radar modes, and they provide real-time, at-a-
glance information. When a data overlay for one radar mode is selected, it is applied to the other
radar modes.
Several radar data overlays are available. You can select the data fields to be shown within each data
overlay.
When overlay numbers are displayed on the radar screen, the navigation inset is shown during
navigation. The compass tape can be shown or hidden in each overlay.
Navigation
inset
Selecting a Data Overlay
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, Offshore, or
3. Select Menu > Radar Setup
4. Select or
Configuring Data Fields on a Radar
You can select the type of data shown within a data field.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, Offshore, or
Menu Radar Setup
3. Select >
4. Select or
7
(page
Sentry mode.
> Crosstalk > On.
Radar with Data Overlay
Sentry mode.
> Overlay Numbers.
to select a data overlay.
Sentry
mode.
Overlay Numbers.
>
to select a data overlay.
69).
GPSMAP 700 Series Owner's Manual
®
Compass tape
Data fields