Nmea 2000 - Garmin GPSMAP 700 Owner's Manual

Gpsmap 700 series
Table of Contents

Advertisement

Setting Decimal Precision for NMEA 0183 Output
You can adjust the number of digits to the right of the decimal point for transmission of NMEA
output.
1. From the Home screen, select
Precision.
2. Select
Two
Digits,
Configuring Waypoint Identification
1. From the Home screen, select
IDs.
2. Complete an action:
Select
Names
to transmit waypoint names via NMEA 0183 while navigating.
Select
Numbers
compatibility with older NMEA 0183 autopilots.
Viewing NMEA 0183 Diagnostic Information
The NMEA 0183 Diagnostics screen is a troubleshooting tool used by installers to verify that NMEA
0183 data is being sent across the system.
From the Home screen, select
Diagnostics.

NMEA 2000

GPSMAP 700 series chartplotters are NMEA 2000 certified and can receive data from a NMEA
2000 network installed on the boat to show specific information, such as depth, speed, water
temperature, wind speed and direction, and engine data.
To connect a GPSMAP 700 series chartplotter to an existing NMEA 2000 network and to see a list
of supported NMEA 2000 PGN numbers, see the GPSMAP 700 Series Installation Instructions.
Viewing a List of NMEA 2000 Network Devices
You can view the devices connected to the NMEA 2000 network.
1. From the Home screen, select
2. Select a device for a list of options.
Selecting a Preferred Data Source
If more than one data source is available, you can select the data source you want to use.
1. From the Home screen, select
2. Select a type of data.
Change
Source.
3. Select
4. Select a data source.
Transmitting NMEA 0183 Data over a NMEA 2000 Network
You can turn on, configure, or turn off output bridging. Output bridging occurs when a chartplotter
takes NMEA 0183 data it receives from any source, formats it into NMEA 2000 data, and sends it
over the NMEA 2000 bus.
1. From the Home screen, select
GPSMAP
700 Series Owner's Manual
®
Configure
Three
Digits, or
Four
Configure
to transmit waypoint numbers while navigating. This option may resolve
Configure
Configure
Configure
Configure
>
Communications
>
Digits.
Communications
>
>
Communications
>
>
Communications
>
>
>
Communications
>
>
Communications
>
NMEA 0183 Setup
> Posn.
NMEA 0183 Setup
>
NMEA 0183 Setup
>
NMEA2000 Device
List.
Preferred
Sources.
Output
Bridging.
Appendix
Waypoint


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents