Viewing Aerial Photos Of Landmarks - Garmin GPSMAP 700 Owner's Manual

Charts and 3D Chart Views
2. Complete an action:
• Select Land Only
the land.
Photo Map Blend
• Select
Use the slider bar to adjust the photo opacity. The higher you set the percentage, the more the
satellite photos cover both land and water.
Photo Overlay Off
Photo Map at 50%

Viewing Aerial Photos of Landmarks

Before you can view aerial photos on the Navigation chart, you must turn on the Photo Points setting
(page 11).
Preprogrammed BlueChart g2 Vision data cards contain aerial photographs of many landmarks,
marinas, and harbors. Use these photos to help orient yourself to your surroundings or to acquaint
yourself with a marina or a harbor prior to arrival.
1. From Home screen, select
2. Select a camera icon.
• A standard camera icon (
• A camera icon with a cone (
the location of the camera, pointed in the direction of the cone.
3. Select Review > Aerial
NOTE: Select the
the full screen.

to show standard chart information on the water, with photos overlaying
to show photos on both the water and the land at a specified opacity.
Chart > Navigation
) indicates an overhead photo.
) indicates a perspective photo. The photo was taken from
Photo.
and buttons to zoom out and zoom in while viewing the aerial photo on
Land Only Photo Overlay
Photo Map at 100%
Chart.
GPSMAP 700 Series Owner's Manual
®