Radar Display Appearance - Garmin GPSMAP 740 Owner's Manual

Radar
4. Complete an action:
• Select High, Medium, or Low to decrease or increase the appearance of rain clutter, if using a GMR
20, 21, 40, 41, 18, 18 HD, 24, 24 HD, 404, or 406 radar. Other targets should remain clearly visible on
the Radar screen.
• Select Up or Down to decrease or increase the appearance of rain clutter, if using a GMR 604 xHD,
606 xHD, 1204 xHD, or 1206 xHD radar. Other targets should remain clearly visible on the Radar
screen. If the FTC setting is greater than 50%, consider reducing the radar range.
5. Select Menu > Noise Rejection > Rain Clutter.
6. Select Up or Down to decrease or increase the appearance of nearby rain clutter until other targets are
clearly visible on the Radar screen.
Clutter caused by rain may still be visible.
Adjusting Crosstalk Clutter on the Radar Screen
You can reduce the appearance of clutter caused by interference from another nearby radar source. On is the
default value for the crosstalk setting.
NoTe: Depending upon the radar in use, the crosstalk setting configured for use in one radar mode may or
may not be applied to other radar modes or to the Radar Overlay
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, offshore, or Sentry mode.
3. Select Menu > Noise Rejection > Crosstlk > on.

Radar Display Appearance

Radar Overlay Numbers
Overlay numbers with data fields
information. All data bars configured for use in one radar mode appear in every other radar mode. All data bars
configured for use on the Radar Overlay appear only on the Radar Overlay, and must be configured separately.
Several radar data overlays are available. You can select the data fields to be shown within each data overlay.
When overlay numbers are displayed on the radar screen, the navigation inset
The compass tape can be shown or hidden in each overlay.
➌
➋
Selecting a Data Overlay
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, offshore, or Sentry mode.
3. Select Menu > Radar Setup > overlay Numbers.
4. Select or
66
can appear on all radar modes, and they provide real-time, at-a-glance
➊
Radar with Data Overlay
to select a data overlay.
(page 63).
is shown during navigation.
➋
GPSMAP 700 Series Owner's Manual
➌
➊