Display Configuration; Navigation Preferences - Garmin GPSMAP 700 Owner's Manual

Display Configuration

Setting the Sound
You can set when the chartplotter makes audible sounds.
1. From the Home screen, select
2. Complete an action:
• Select Alarms Only
• Select On (Touch and Alarms)
when alarms are triggered.
Setting the Language
You can select the language that appears on the chartplotter.
1. From the Home screen, select
2. Select a language.

Navigation Preferences

Route Settings
Selecting a Route Label Type
You can select the type of labels shown with route turns on the map.
1. From the Home screen, select
2. Complete an action:
Show Name
• Select
Show Number
• Select
Configuring Route Turn Transitions
You can set how much time, or how far, before a turn in a route that you transition to the next leg.
Raising this value can help improve the accuracy of the autopilot when navigating a route or an Auto
Guidance line with many frequent turns, or at higher speeds. For straighter routes or slower speeds,
lowering this value can improve autopilot accuracy.
1. From the Home screen, select
2. Complete an action:
Time Turn Transition
• Select >
• Select Distance
3. Select Done.
GPSMAP 700 Series Owner's Manual
®
Configure
to have the chartplotter beep only when alarms are triggered (default).
to have the chartplotter beep when the screen is touched and
Configure
Configure
to identify route turns using waypoint names.
to identify route turns using numbers, such as Turn 1 and Turn 2.
Configure
Time. Enter the time.
> Turn Transition Distance. Enter the distance.
System Beeper/Display
> >
System > Language.
>
> Navigation > Route
> Navigation > Turn Transition
Device Configuration
> Beeper.
Labels.
Activation.