Nmea 0183 And Nmea 2000 - Garmin GPSMAP 700 Owner's Manual

Appendix
Restoring the Original Chartplotter Factory Settings
NOTE: This procedure deletes all settings information you have entered.
1. From the Home screen, select
2. Select Yes.

NMEA 0183 and NMEA 2000

A GPSMAP 700 series chartplotter can accept data from both NMEA 0183-compliant devices and
certain NMEA 2000 devices connected to an existing NMEA 2000 network on your boat.
NMEA 0183
The NMEA 0183 data cable included with each GPSMAP 700 series chartplotter supports the
NMEA 0183 standard, which is used to wire various NMEA 0183-compliant devices, such as VHF
radios, NMEA instruments, autopilots, wind sensors, and heading sensors.
To wire the GPSMAP 700 series chartplotter to optional NMEA 0183-compliant devices, see the
GPSMAP 700 Series Installation Instructions.
Approved NMEA 0183 Sentences
GPAPB, GPBOD, GPBWC, GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE,
GPVTG, GPWPL, GPXTE, and Garmin proprietary sentences PGRME, PGRMM, and PGRMZ.
This chartplotter also includes support for the WPL sentence, DSC, and sonar NMEA 0183 input
with support for the DPT (depth) or DBT, MTW (water temp), and VHW (water temp, speed, and
heading) sentences.
Configuring NMEA 0183 Output Sentences
You can configure how the chartplotter sees NMEA 0183 output sentences.
1. From the Home screen, select
2. Select a setting: Route, System, Garmin, or Sounder.
3. Select one or more NMEA 0183 output sentences.
4. Repeat steps 2 and 3 to configure additional settings.
Setting the Communication Format for Each NMEA 0183 Port
You can configure the input/output format for each port to use when connecting your chartplotter to
external NMEA devices, a computer, or other Garmin devices.
1. From the Home screen, select
2. Complete an action:
NMEA 0183 Port
• Select
• Select NMEA 0183 Port
3. Select an input/output format:
• Select Garmin Data Transfer
interfacing with Garmin software.
NMEA Std.
• Select
sonar NMEA input support for the DPT, MTW, and VHW sentences.
NMEA High Speed
• Select
receivers.

Configure > System
Configure Communications
>
Configure > Communications
1.
2.
to support the input or output of Garmin-proprietary data for
to support the input or output of standard NMEA 0183 data, DSC, and
to support the input or output of standard 0183 data for most AIS
> System Information
NMEA 0183
>
> NMEA 0183
GPSMAP 700 Series Owner's Manual
®
> Factory Settings.
Setup.
Setup.