Hsi Page; To Adjust The Simulated Aircraft Ground Speed; To Control The Ground Track; To Reset The Simulator To Automatically Track The Desired Course - Garmin GPSMAP 195 Pilot's Manual & Reference

TAKEOFF TOUR
The HSI page graphically
depicts desired track,
ground track, course devia-
tion and TO/FROM. The
example shown above is on
course and heading toward
the destination waypoint.
R R
Use the keypad to
'drive' simulator mode
operations. The
DOWN arrows control
speed. The RIGHT/LEFT
arrows control ground
track.
22
The next screen following the map page is the HSI (Horizontal
Situation Indicator) page.
To select the HSI page:
1. Press the
The HSI page is your primary navigation screen and graphically
depicts desired track, ground track, crosstrack error (course
deviation) and a TO/FROM indication. The HSI display also provides
vertical guidance when using the unit' s vertical navigation features.
Desired Track
Pointer
Bug Indicator
D-Bar
(part of CDI)
Compass
Card
User-selectable data fields appear at the top and bottom of the
page, and provide distance to destination waypoint, ground speed
and estimated time en route, among others.
Whenever the GPSMAP 195 is in simulator mode, you can adjust
your speed and course from the HSI page using the
let' s head toward our airport by adjusting the ground speed and track
to get a feel for how the HSI works.

To adjust the simulated aircraft ground speed:

1. Press the UP arrow of the
5-knot increments. Press the DOWN arrow to decrease the
speed in the same increments.

To control the ground track:

UP/ 1. Press the LEFT or RIGHT arrows of the

To reset the simulator to automatically track the desired course:

1. Press
J
key (repeatedly, if necessary, until it appears).
R
G T
, followed by .

HSI PAGE

Data
Fields
TO/FROM
Scale
R
keypad. Now
keypad to increase the speed in
R
keypad.
Flag
CDI