Entering Data; To View The Main Menu - Garmin GPSMAP 195 Pilot's Manual & Reference

USING MENUS (cont.)
A main menu is provided to make changes to system settings.
Selecting miles per hour instead of knots, using the built-in simula-
tor mode, creating routes or performing E6-B calculations are all
accomplished from the main menu.

To view the main menu:

O
1. Press the key twice.

ENTERING DATA

You may enter data, such as airport identifiers and user waypoint
coordinates, on certain pages. To enter data, you must first highlight
R
(using the keypad) the area on the display where it will be placed.
A rule-of-thumb to remember: The data entry process begins and ends by
T R
pressing . The
For example, to enter "KIXD" as a destination airport:
1. Display the select GOTO destination page by pressing the
2. Highlight the data entry field using the
T
3. Press .
4. Use the UP/DOWN arrows of the
character.
5. Use the RIGHT arrow of the
character. If you make a mistake, back up with the LEFT arrow. To
clear the data field entirely, press the LEFT arrow repeatedly until the
field is blank.
6. Repeat steps 3 and 4 until the identifier is selected (see right).
T
7. Press to accept the identifier.
keypad is then used to enter the actual data.
R
keypad.
R
keypad to select the first
R
keypad to move to the next
TAKEOFF TOUR
used to enter an airport
identifier. To start, high-
light the data entry field
and press
G
key.
er using the
UP/DOWN arrows to
change
RIGHT arrow to move to
the next character, then
press
The rocker keypad is
† †
.
Enter the airport identifi-
R R
keypad,
characters or
† †
when finished.
11