Sumulator Settings; Alarms Settings; To Set The Simulated Track And Speed; To Designate The Simulated Position From The Map Display - Garmin GPSMAP 195 Pilot's Manual & Reference

REFERENCE
Main Menu: Setup
The 'Auto Track' setting
allows the simulator to
automatically "line up" on
the correct bearing to a des-
tination waypoint. 'User
Track' allows you to set the
ground track to any direc-
tion.
Alarms are provided for
various airspace categories,
arrival, CDI and an alarm
clock. To set the alarm
clock, enter the time when
you wish the alarm to
sound.
66
The simulator submenu provides complete setup control of the
simulator mode. From this page, you may designate a starting posi-
tion and altitude, enter a simulated speed and define a ground track.
To turn the simulator mode on or off:
1. Highlight the 'Mode' field and press
2. Select 'Simulator On' or 'Simulator Off' and press
To designate the simulated position and altitude:
1. Highlight the 'Position' field and press
2. Enter the latitude/longitude coordinates for the starting position and
T
press .
3. The highlight will move to the 'Altitude' field. Press
4. Enter the starting altitude and press

To set the simulated track and speed:

1. Highlight the 'Track Control' field and press
2. Select 'Auto Track' or 'User Track' and press
T
selected press
again. 'Auto Trac' will automatically adjust the ground track based
upon the bearing to an active GOTO or route waypoint.
3. Highlight the 'Speed' field and press
4. Enter the desired speed and press
An options menu allows you to designate the simulated position
using the map display, instead of entering position coordinates.

To designate the simulated position from the map display:

O
1. Press followed by
2. Select the starting location using the
T
essary) and press
The alarms submenu provides controls for the alarm clock,
arrival alarm, course deviation alarm and the various airspace alerts.
The alarm clock uses the internal clock to provide an 'Alarm Clock'
message at the time you set.
To enable/disable the alarm clock:
1. Highlight the 'Clock Alarm' field and press
2. Select 'On' or 'Off' as desired and press
3. If enabling the alarm, highlight the time field and press
the alarm time and press
GPSMAP 195 will alert you with the 'Alarm Clock' message. (The
GPSMAP 195 must be powered on when the alarm time is reached.
Otherwise, the message will not occur.)
SIMULATOR SETTINGS
T
.
T
.
T
.
T
, enter the desired ground track and press
T
.
T
.
T
to select 'Initialize Position?'.
R
keypad (and
when finished.

ALARMS SETTINGS

T
T
T
. When the alarm time is reached the
T
.
T
.
.
T
. If 'User Track' is
T
A
if nec-
.
.
T
. Enter