Customizing Pages; Customizing The Startup Screen; Recommended Startup Image Dimensions; Creating A New Combination Page - Garmin GPSMAP1222 Owner's Manual

Customizing Pages

Customizing the Startup Screen

You can personalize the image that is displayed when the chartplotter is turning on. For the best fit, the
image should be 50 MB or less and conform to the recommended dimensions
Dimensions, page 9).
1 Insert a memory card that contains the image you want to use.
2 Select > System > Sounds and Display > Startup Image > Select Image.
3 Select the memory card slot.
4 Select the image.
5 Select Set as Startup Image.
The new image is shown when turning on the chartplotter.

Recommended Startup Image Dimensions

For the best fit for the startup images, use an image that has the following dimensions, in pixels.
Display resolution
WVGA
WSVGA
WXGA
FHD
WUXGA
4KUHD

Creating a New Combination Page

You can create a custom combination page to suit your needs.
1 Select Combo > Add Combo.
2 Select a window.
3 Select a function for the window.
4 Repeat these steps for each window of the page.
5 Select Layout, and select a layout.
6 Select Name, enter a name for the page, and select Done.
7 Select Overlays, and select which data to show.
8 Select Done when you have finished customizing the page.
Customizing the Chartplotter
Image width
680
880
1080
1240
1700
2480
(Recommended Startup Image
Image height
200
270
350
450
650
900
9