Symbol Waypoints; To Add The Waypoint To A Route; To Save The Autostore Waypoint; To Create An Autostore Waypoint From The Map Page - Garmin GPSMAP 195 Pilot's Manual & Reference

AUTOSTORE WAYPOINTS (cont.)

To add the waypoint to a route:

T
1. Press the key.
2. Select the desired route with the
T
3. Press the key to confirm the route number.

To save the AutoStore waypoint:

1. Highlight the 'done' field and press
The AutoStore feature may be used to create waypoints at locations
other than your present position. This is accomplished by panning to
the desired location on the map page (see pages 51-52) prior to
selecting AutoStore with the
when navigating to a particular geographic area (such as a lake)
which appears on the map page or when selecting a city as your des-
tination.

To create an AutoStore waypoint from the map page:

1. Pan to the desired location on the map display, using the
W
2. Press the key to display the autostore page. Note the designa-
tion directly above the position's coordinates: "MAP PT POSITION"
or "MAP POSITION". ("MAP PT POSITION" will create a user
waypoint at the location of a designated on-screen feature, such as
a city location. "MAP POSITION" will create a user waypoint at any
location designated by the panning cursor.)
3. To create a waypoint at the panning cursor's position, press
4. To revert back to your present position and save it as a user way-
point, highlight "Use GPS Posn?" (at the bottom of the page) and
T
press twice.

SYMBOL WAYPOINTS

In addition to 250 user waypoints, the GPSMAP 195 provides stor-
age capability for 250 symbol waypoints. Symbol waypoints are sim-
ilar in function to user waypoints—but do not include waypoint
names, comments or reference waypoint information.
To create a symbol waypoint:
1. Pan to the desired location on the map page, using the
T
and press .
2. Select "Symbol Waypoint" and press
Waypoint" window will appear.
3. To change the waypoint's symbol, use the
symbol field (top right corner of the window) and press
R
the keypad to select a new symbol and press
4. To save the new symbol waypoint, use the
"Done?" (bottom right corner of the window) and press
R
keypad and press
T
.
W
key. This is particularly useful
T
. A "Create New
R
keypad to highlight the
T
R
keypad to highlight
T
.
R
keypad.
T
.
R
keypad,
T
. Use
.
T
.
REFERENCE
W W
KEY
AutoStore waypoints can
also be added to a route,
allowing you to build a
route as your flight pro-
gresses.
To create a symbol way-
point, pan to the desired
location on the map page
† †
and press . A window
will appear, asking if you
wish to create a user
waypoint or a symbol
waypoint.
39