Table of Contents
Advertisement
ALARMS SETTINGS (cont.)
The waypoint arrival alarm will activate an alarm message once
you've come within a set distance to a destination waypoint.
To enable/disable the arrival alarm:
1. Highlight the 'Arrival Alarm' field and press
2. Select 'Auto', 'On' or 'Off' as desired and press
provides the alarm one minute before reaching your destination,
based upon current ground speed and track.
3. If 'On' is selected, highlight the distance field and press
the alarm distance and press
destination waypoint, an 'Arrival at _____' message occurs when
you are within the alarm distance you entered.
The course deviation alarm provides a message when you deviate
off course beyond the specified distance.
To enable/disable the course deviation alarm:
1. Highlight the 'Course Deviation Alarm' field and press
2. Select 'On' or 'Off' as desired and press
3. If enabling the alarm, highlight the distance field and press
Enter the alarm distance and press
alarm distance, left or right of course, a 'CDI Alarm' message
occurs.
AIRSPACE ALARMS
The last item on the alarms submenu is airspace alarms. The
airspace alarms will inform you of any special use or controlled
airspace near your position or in your flight path, according to the
following conditions:
• 'Airspace Ahead Less Than 10 minutes'— occurs if your
projected course will take you inside an airspace within the next
10 minutes.
• 'Airspace Near and Ahead'— is displayed when you are with-
in two nautical miles of an airspace and your current course will
take you inside the airspace.
• 'Inside Airspace'— is presented when you have entered the
boundaries of the airspace.
• 'Near Airspace Less Than 2 nm'— appears when you are
within two nautical miles of an airspace, but your current course
will not take you inside the airspace.
WARNING: If you fly above or below an airspace, then descend or climb to
enter the airspace, the 'Inside Airspace' message may be the only alert provid-
ed! The 'Airspace Ahead' and/or 'Airspace Near' messages will not occur if you
are outside the vertical limits defined by the airspace, plus the altitude buffer.
T
.
T
T
. As you approach the
T
T
.
T
. If you deviate beyond the
!
. 'Auto'
T
. Enter
.
T
.
REFERENCE
Main Menu: Setup
The arrival alarm 'Auto'
setting, provides an 'Arrival
at _____' message one
minute before reaching the
destination waypoint.
The course deviation
alarm provides an alert
when you drift off course
beyond the limits you have
set.
67
Hide quick links:
Advertisement
Table of Contents
