Agilent Technologies InfiniiVision 4000 X-Series User Manual page 188

10
Triggers
Provide Correct Matching
N O T E
Many video signals are produced from 75
sources, a 75
oscilloscope input.
4 Press the sync polarity softkey to set the Video trigger to either positive
5 Press the Settings softkey.
6 In the Video Trigger Menu, press the Standard softkey to set the video
Standard
NTSC
PAL
PAL-M
SECAM
188
terminator (such as an Agilent 11094B) should be connected to the
( ) or negative (
standard.
The oscilloscope supports triggering on the following television (TV) and
video standards.
With the DSOX4VID extended video triggering license, the oscilloscope
additionally supports these standards:
sources. To provide correct matching to these
) sync polarity.
Type
Interlaced
Interlaced
Interlaced
Interlaced
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Sync Pulse
Bi-level
Bi-level
Bi-level
Bi-level