Agilent Technologies InfiniiVision 4000 X-Series User Manual page 311

1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Press the Settings softkey.
4 Finally, press the Press to Save softkey.
CSV Data
When the CSV data (*.csv) file format is selected, comma- separated values
for each displayed waveform and digital channel pod are saved as multiple
columns in a single file. Math FFT waveforms, whose values are in the
frequency domain, are appended at the bottom of the .csv file. Pod names
(for example, D0- D7) or waveform labels are used as column headers. This
format is suitable for spreadsheet analysis.
For CSV data, length "N" value- at- time measurements are performed
across the entire screen (using the measurement record data) for each
active source. Interpolation between measurement record data points is
performed as needed.
ASCII XY Data
When the ASCII XY data (*.csv) file format is selected, comma- separated
value files for each displayed waveform, digital channel pod, digital bus,
and serial bus are saved. For digital pods, an underscore (_) and the pod
name (for example, D0- D7) are appended to the specified file name;
otherwise, an underscore and the waveform's label are appended.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
CSV data (*.csv), ASCII XY data (*.csv), or Binary data (*.bin).
navigate to the save location. See
page 315.
In the File Settings Menu, you have these softkeys and options:
Setup Info — when enabled, setup information (vertical, horizontal,
•
trigger, acquisition, math, and display settings) is also saved in a
separate file with a TXT extension.
Length — sets the number of data points that will be output to the
•
file. For more information, see
Save Seg — when data is acquired to segmented memory, you can
•
specify whether the currently displayed segment is saved or all
acquired segments are saved. (See also
Memory" on page 228.)
A message indicating whether the save was successful is displayed.
Save/Email/Recall (Setups, Screens, Data)
"To navigate storage locations"
"Length Control"
"Saving Data from Segmented
18
on
on page 312.
311