Agilent Technologies InfiniiVision 4000 X-Series User Manual page 179

5 For each channel you select, press the Slope softkey and select
6 To set all analog and digital channels to the edge selected by the Slope
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Adjust the trigger level for the selected analog channel by turning the
Trigger Level knob. Press the [Digital] key and select Thresholds to set
the threshold level for digital channels. The value of the trigger level or
digital threshold is displayed in the upper- right corner of the display.
(Rising), (Falling),
displayed above the softkeys.
If all channels in the OR trigger are set to don't care, the oscilloscope
will not trigger.
softkey, press the Set all Edges softkey.
(Either), or X (Don't Care). The selected slope is
10
Triggers
179