Dimension ES-3124 Ethernet Switch
30.4.9
vlan1q port gvrp
Syntax:
sys sw vlan1q port gvrp <port> <enable|disable>
where
<port>
<enable|disable> =
This command turns GVRP on or off for the specified port.
The following example turns off GVRP for port 2.
ES-3124> sys sw vlan1q port gvrp 2 disable
30.4.10
vlan1q svlan cpu
Syntax:
sys sw vlan1q svlan cpu <VLAN ID>
where
<VID> =
This command sets the management VLAN (CPU). You can only use ports that are members of this management
VLAN in order to manage the switch.
The following example sets VLAN ID 2 to be the CPU (management) VLAN.
ES-3124> sys sw vlan1q svlan cpu 2
30.4.11
vlan1q svlan setentry
Syntax:
sys sw vlan1q svlan setentry <name> <VID> <PORT> <ADCTL> <TAGCTL>
where
<name>
<VID>
<PORT>
30-6
=
A port number
Turn GVRP on or off.
Figure 30-10 vlan1q port gvrp Command Example
The VLAN ID. Valid parameter range = [1 – 4094].
Figure 30-11 vlan1q svlan cpu Command Example
=
A name to identify the SVLAN entry.
=
The VLAN ID [1 – 4094].
=
This is the switch port number.
IEEE 802.1Q Tagged VLAN