ZyXEL Communications Dimension ES-3124 User Manual page 193

bmstorm
disable
enable
port
display
mac static
ageSet
ageView
list
count
flush
filter l2addr
mirror
Introduction to CLI
Table 28-2 Command Summary: sys sw
COMMAND
<port> <type> <active(on|off)>
<threshold(pps)>
disable
display [<mac> <vid>]
set <port> <MAC> <vid>
del <port> <MAC> <vid>
<timeout>
Port <port>
all
<enable> <mac><vid> <discardSrc>
<discardDst>
Dimension ES-3124 Ethernet Switch
DESCRIPTION
These commands relate to
broadcast storm control.
Turns off broadcast storm
control.
Turns on broadcast storm
control.
Sets broadcast storm control on
a port for a specific packet type
in packet per second (pps).
Displays broadcast storm control
ports' settings.
Displays static MAC addresses.
Clears current run-time static
MAC address settings
Displays current run-time static
MAC addresses on the ports.
Configures a static MAC address
on the specified port.
Deletes a static MAC address on
the specified port.
Sets aging timeout.
Displays the aging timeout
period.
Displays the forwarding table
entries.
Displays the number of MAC
addresses in the forwarding
table.
Deletes learned MAC addresses
on the specified port in the
forwarding table.
Deletes all learned MAC
addresses in the forwarding
table.
The following command relates
to port filters. Port filtering means
sifting traffic based on the source
and/or destination MAC
addresses and VLAN group.
The following commands relate
to port mirrors. Port mirroring is
copying traffic from one or all
ports to another or all ports for
external analysis.
28-11